Ukukhanyisa kwekhitshi kunye ne-LEDs: iinketho kunye nokufakwa

I-Chandeliers ngokuthe ngcembe ilahlekelwa zizikhundla zabo zobunkokeli, kwaye zitshintshwa zizibane zangaphambili kunye nezibane ezine-LED. Olu khetho lufanelekile ngokukodwa ekhitshini, apho kubaluleke kakhulu ukukhanyisa ngokulinganayo yonke i-square centimeter yendawo yokusebenza.

Ubuqili bombutho wokukhanya kweLed ekhitshini

Kwiikhikhini, ukhetho olungcono kakhulu lokukhanyisa lukhanyayo, kodwa alukhathazi ukukhanya.

Iingcebiso malunga nombutho wokukhanyisa kwe-LED ekhitshini:

• I-backlight kufuneka ibe yinto efanayo, ngaphandle kweendawo ezinomthunzi kunye ne-glare – oku kuyimfuneko ukulungiselela ukulungiswa okunethezeka kwezinto zokuzonwabisa zokupheka.
• Inketho efanelekileyo kakhulu yendawo yemithombo yokukhanya iphantsi kweekhabhinethi zodonga. Emva koko ukukhanya kuya kukhululeka, akuyi kukhanya.
• Iindawo zefenitshala azikhanyisi kuphela iindawo, kodwa zihlobisa indawo. Baziphakamisa ngokubonakalayo iisilingi, bandise indawo, kwaye banokuthatha indawo yokukhanya okuphambili ngokuhlwa.

Unokugqamisa ikhitshi usebenzisa i-tape ye-diode okanye amabala (izibane) zeentlobo ezahlukeneyo.

Iteyiphu ene-LEDs

Le yinto yokukhanyisa indawo yonke enokuthi ibekwe kwiindonga okanye kwisethi yekhitshi. I-tape inika ukukhanya okufanayo kunye ne-glare-free enganikeli shading.

I-tape ifakwe phantsi okanye kumgca we-interface kunye ne-apron. Ukuba ubeka izibane ezimbalwa ngaphezulu kweekhabhinethi, ngoko unokwenza ngaphandle kwe-chandelier ephakathi.

I-strip ye-LED inenkangeleko ecocekileyo kwaye ifanelekile kwiindidi ezahlukeneyo zangaphakathi. Abavelisi banikela nge-monochrome (umbala omnye) kunye neemodeli ezinemibala emininzi. Isisombululo esona sisisombululo simhlophe, njengoko iimodeli eziqaqambileyo ezigqithiseleyo zixhomekeke ekukhanyeni ukukhanya.

vula itheyiphu

Zivumelekile ukuba zisetyenziswe kwiindawo ezingabandakanyi ngokupheleleyo ukungena komswakama. Iiteyiphu ezivulekileyo zineklasi yokukhusela umswakama ophantsi kunye nokutywinwa okunganeleyo (IP 20-33). Iiteyiphu ezivulekileyo zibekwe ngokukodwa kwindawo ephezulu yeekhabhinethi zasekhitshini. Ngaphandle koko, ukufuma okanye igrisi ngokuqinisekileyo kuya kufumana kwiteyiphu.

Iiteyiphu ezisecaleni

Inketho yecala elinye – i-tape ekhuselweyo ukusuka kwicala apho ii-LED zibekwe khona. Kukho amakhulu eemodeli ezahlukeneyo zeeteyiphu ezicalanye ezithengiswayo, ezahlukileyo kwiiparitha ezahlukeneyo.

Iitayipi zohlobo olulodwa zinconywa ukuba zifakwe phezulu kwiikhabhinethi, kude ne-sink.

Iiteyiphu ezimacala amabini

Imicu ye-LED enamacala amabini ilungile kuba itywinwe ngokupheleleyo. Iimodeli ezinjalo zikhuselwe ngokuthembekileyo emanzini kumacala omabini. Ziyakwazi ukufakwa naphi na, kubandakanywa kwi-apron yasekhitshini.

Amabala phezu kweendawo zokusebenza

Izibane ze-LED ezifakwe ekhitshini zihluke kwindlela yokuyila kunye nokunyuka. Kukho i-overhead, mortise kunye neenketho ezinyusiweyo. Ukuphelisa izithunzi kunye ne-glare, kubalulekile ukunyusa ngokuchanekileyo amabala.

ngaphandle 

Ezi zixhobo ziza kulungeleka kwiikhikhithi ezinesilingi eziphezulu kunye neekhabhathi ezinkulu. Iimodeli ezinjalo zihlala zifakwe ngokuthe ngqo kwisilingi.

Izibane zangaphandle kunye nokumiswa zifakwe kwi-stretch, plasterboard kunye nezinye iisilingi. Iifasteners zenziwa ngokusebenzisa iintambo ezikhethekileyo kunye nezibiyeli.

Ngaphezulu kwifenitshala

Izibane ezibekwe phezu komhlaba zifakwe kwiiprofayili zetsimbi, iigrayiti zokhuni kunye nefenitshala. Ukufakela izibane ezinjalo, akukho lwazi olukhethekileyo kunye nezakhono ezifunekayo – kwanomntu oqalayo uya kujamelana nomsebenzi.

Amabala angaphezulu anokususwa kwaye aphinde alungelelaniswe kwenye indawo. Ngokuhamba kwexesha, izibane ezinjalo azibonakali, kwaye emva kokufakwa kwakhona, kwakhona. Izibane zivame ukwenziwa kunye nomsebenzi wokujikeleza – ukwenzela ukuba ukwazi ukuqondisa ukukhanya ngendlela efanelekileyo.

Abavelisi banikezela ngoluhlu olubanzi lwamabala. Zenziwe ngesinyithi, iplastiki, i-plaster moldings. Izibane nazo ziyahluka ngobukhulu. Iimodeli ezityebileyo zongeza ukuqina kwifanitshala, ezibhityileyo zigcina indawo yasimahla.

Iindawo zokufa

Izibane ezinjalo zikwabizwa ngokuba zakhiwe ngaphakathi. Zisetyenziselwa ikakhulu kwiisilingi zobuxoki, kodwa nazo zifanelekile kwiikhabhinethi zasekhitshini. Kwiimeko zeendawo zokufa kukho iithebhu ezilayishwe entwasahlobo, apho zilungiswa khona kwiiplatifti.

Izibane ezakhelwe ngaphakathi zifakwe kwiingcango okanye kwiingubo zeekhabhinethi zekhitshi, kunye nakwii-niches – kwiindonga phakathi kwezinto ze-headset.

Abavelisi banikezela ngeendawo zokufa zemilo eyahlukeneyo:

• isikwere;
• uxande;
• unxantathu
• ngqukuva;
• i-asymmetrical.

Iindawo ezakhelwe ngaphakathi zifakwe ngexesha lofakelo lwefenitshala – ngokweskimu esenziwe ngaphambili.

Iiphaneli zokwaleka

Izibane zolu hlobo zisetyenziswa kakhulu kumaziko orhwebo kunye norhulumente. Bakuvumela ukuba wenze ukukhanya okukumgangatho ophezulu okubonakala kunomtsalane kwiiofisi, kwiindawo zokuthengisa, kumaziko ezonyango kunye nezemfundo.

Izibonelelo zeepaneli ze-LED ezingaphezulu:

• ukukhanya okuhle;
• ukunika ukukhanya okuthambileyo kunye nokusabalalisa okungadinwayo amehlo;
• ukusebenza kakuhle.

I-Overhead Led-panels yemilinganiselo encinci ingasetyenziselwa ukudala ukukhanya ekhitshini. Izixhobo ezinjalo zixhotyiswe ngee-LED, ngoko zikhonza iminyaka emininzi. Unokuzifakela ngaphandle koncedo lweengcali, kuphela i-screws yokuzibamba iyadingeka ukuze kufakwe.

Izibane ze-LED ezihlaziyiweyo

Ukufakela iindawo ezakhelwe ngaphakathi kunokuba nzima kubantu abangenamava okufaka izixhobo ezinjalo. Ukulungisa iindawo ezakhiweyo kwifenitshala, kufuneka wenze imingxuma kuyo – ukutsala i-wiring.

Ukuze ungonakalisi ifenitshala, kucetyiswa ukuba ulandele ukukhanya kwangaphambili – kwinqanaba lokuyila isethi yekhitshi (ngomyalelo). Amabala ahlaziyiweyo anika ukukhanya okuqaqambileyo kunye nolwalathiso, zihle kwaye ziyasebenza – zilungele ikhitshi.

Iintlobo zeendawo ezizinzisiweyo:

• Chukumisa. Iimodeli ezinjalo zibonwa njengesisombululo esona sisisombululo sofakelo ekhitshini. Kukho izibane ezikhanyisa ngokucofa enye, ezinye zikhanyisa ukuba umntu ukwindawo ekusetyenzwa kuyo – ezi zine-motion sensor. Amabala anjalo agcina umbane kunye nexesha labathengi.
• Umgca. Zinemilo emide. Umbala wecala – umhlophe okanye isilivere. Ngokukhanya okuqaqambileyo, banamandla amancinci. Basebenza zombini ukusuka kwi-220 V kunye ne-12-24 V. Kwimeko yesibini, baxhotyiswe nge-converter ye-voltage.
• Ifenitshala. Izibane ezinjalo zifakwe ukuba ufuna ukugqamisa ngokuqaqambileyo indawo ethile yekhitshi, ukugxila ingqalelo kwinto ethile. Iindawo zefenitshala zigxininisa ukuyila kwefenitshala yekhitshi, khanyisa indawo yokusebenza ngomgangatho ophezulu.
  Izibane zefenitshala zincinci ngobukhulu, zibukeka zihle kwaye zinesitayile kwiifacade zeekhabhinethi.

Iimpawu zokukhethwa kwe-backlight

Xa ukhetha izixhobo zokukhanyisa ekhitshini, kufuneka ubeke ingqalelo kwiiparitha ezininzi eziza kukuvumela ukuba ukhethe imodeli efanelekileyo kakhulu kwiinjongo zakho.

Amandla e-LED

Uphawu, olulinganiswe kwi-Watts, likuvumela ukuba uvavanye ukusebenza okukhanyayo kwezixhobo, kwaye kubonisa ubungakanani bombane osetyenzisiweyo. Ukuba kuzo zonke ezinye izibane amandla lixabiso elichaza amandla okukhanya, ngoko ke kubalingane be-LED le parameter yinto yesibini.

Izibane ze-LED, ngokungafaniyo neminye imithombo yokukhanya, nangona amandla aphantsi alinganisiwe anika ukukhanya okuqaqambileyo. Omnye onokuzalisa izibane ze-incandescent ezilishumi elinesibini. Ukufumana isibane esinikwe isibane esiqhelekileyo se-100-watt, isibane se-LED se-9-10 sanele.

Amandla akhazimlayo

Eli xabiso lilinganiswa kwi-lumens (lm) kwaye lihambelana ngokuthe ngqo namandla esibane. I-flux ekhanyayo ekhutshwe yi-LEDs ingamandla e-beam okanye i-quanta ekhutshwe ngumthombo wokukhanya. Okukhona i-LED inamandla angakumbi, kokukhona isibane somelele ngakumbi .

Ngokomzekelo, isibane se-Led esinamandla e-5-7 W sivelisa i-flux ye-250 lm, 25-30 W – 1,200 W.

Xa ukhetha isibane se-LED, kufuneka kwakhona uthathele ingqalelo iqondo lokushisa elikhanyayo, elilinganiswe kwi-K (kelvins). Ukuphakama kweli xabiso, kubanda ukukhanya, okuphantsi, ukufudumala.

Ubushushu obukhanyayo kunye nokukhanya:

• ubushushu obumhlophe – 2,500-4,000 K;
• emhlophe engathathi hlangothi – 4000-6500 K;
• mhlophe obandayo – 6 500-9 500 K.

Eyona nto ithandwa kakhulu kwiliso lomntu kukubengezela okumhlophe. Zezi zibane ezicetyiswayo ukuba zikhethe ukulungiswa.

Ukukhuselwa kuthuli kunye nokufuma

Emva kokufunda imiyalelo yesibane se-LED eyenzelwe ukufakwa ekhitshini, unokufumana ipharamitha echaza iqondo lothuli kunye nokukhuselwa komswakama. Ichazwa ngoonobumba IP kunye namanani amabini.

Amanqanaba okhuseleko:

• 0-5 – ukusuka kwizinto ezingcolileyo eziqinileyo;
• 0-8 – ukusuka emanzini.

Uhlobo lweziseko ze-LED kunye nezibane

Izibane zixhotyiswe ngeekhatriji apho izibane ze -LED zikrwelwe . Ngoko ke, xa uthenga ii-bulbs zokukhanya, qaphela ukuthotyelwa kwesiseko sabo kunye ne-cartridge. Kukho iintlobo ze socles – B, E, P, G, S.

Izibane ze-LED zikwahlulahlulwe ngokwezi ntlobo zilandelayo:

• SMD LED. Apha, kwiikristale ezibekwe phezu kobhedu okanye i-aluminium substrate, kukho isambatho-iphosphor. Zinamandla, zimhlophe ngombala, zikhupha ukukhanya kwi-angle ye-100-130 °.
• I-Filament LED. Ngokuqhelekileyo zisetyenziswa njengezibane zokuhombisa. Zinokukhanya okumnandi kakhulu kwamehlo, okukhumbuza i-spectrum yezibane ze-incandescent. Ndiyabulela kwi-substrate ye-cylindrical, ukukhanya okukhanyayo kuhlakazekile kwi-angle ye-360 °.
• Ii-COB LEDs. Ezi ziitshiphusi ezifakwe ebhodini. Ziquka iikristale ezininzi ze-SMD ezihlanganiswe kwiphakheji enye, egqunywe ngephosphor. Ukukhanya okukhanyayo kwezibane ezinjalo kunamandla kakhulu, kwaye i-angle yokusabalalisa i-180 °, ngoko ayifanelekanga ekudaleni ukukhanya okuhamba phambili.

iiswitshi

Izibane ze-LED zixhotyiswe ngeentlobo ezahlukeneyo zokutshintsha. Zichaphazela ukufakela, ukusebenza kunye nentuthuzelo yokusetyenziswa.

Ukhetho lokutshintsha:

• Ikhonkco kunye nohlobo lweqhosha. Ezi ziimodeli eziqhelekileyo ezingadingi ukuthengwa kwezixhobo ezongezelelweyo kunye nezixhobo. Ukutshintsha kwekhonkco kunokufakwa phantse naphi na. Olu khetho, nangona luphelelwe yisikhathi, lukhethwa ngabathengi ngenxa yokulula nokuthembeka.
• Ngaphandle koqhagamshelwano. Zikuvumela ukuba ukhanyise kwaye ucime isibane ngokushukumisa isandla sakho. Basenokusekwa kuyo nayiphi na enye intshukumo. Ukhetho lubonakala lufanelekile, kodwa kunokubakho iingxaki xa kubangelwa – kufuneka ubeke ngendlela esebenza ngayo ngexesha elifanelekileyo.
  Oku akusoloko kusebenza – ukukhanya kungavula / kucinywe ukuphendula kwintshukumo engaqhelekanga.
• Ulawulo lwerimothi. Esi sisisombululo esiluncedo nesisebenzayo, esilungele abasebenzisi abangatyekelekanga ekuphulukaneni neendawo ezikude. Olu khetho lufuna ufakelo lomamkeli ukubamba nokuguqula imiyalelo evela kulawulo olude. Njengomthetho, isixhobo esinjalo sixhotyiswe ngesibane esinolawulo olukude.
• Inketho edibeneyo. Ukukhetha i-remote control ukulawula izibane, unokudlala ngokukhuselekileyo kwaye ubeke ukongeza iswitshi eqhelekileyo – xa kunjalo. Uya kunceda ukuba ngokukhawuleza i-remote ilahlekile kwenye indawo.

Ukunikezwa Amandla

Ayizizo zonke iintambo ze-LED ezifanelekileyo kwinethiwekhi ye-220 V. Kwaye okona kubaluleke kakhulu, azifanelekanga ukufakwa kwifenitshala. Apha sifuna iiteyipu ezinikwe amandla ombane we-12 V. Ukuze sidibanise nabo, sifuna izixhobo zombane eziguqula i-220 V kwixabiso elifunekayo.

Izixhobo zombane zenzelwe amandla ahlukeneyo, ngoko ngaphambi kokuba uzithenge, kufuneka ubale inkqubo yokukhanyisa kwixesha elizayo. Ukwenza oku, amandla omgca (P, W) aphindwe ngobude benkqubo yonke (l, m). Imveliso iphindwe nge-1.25 (ukuthembeka kwento) – ukubonelela inkqubo kunye nokugcinwa kwamandla ongezelelweyo.

Umlawuli weteyiphu ye-RGB

Xa usebenzisa i- RGB strip , kufuneka uthenge isilawuli esifanelekileyo se-RGB. Njengomthetho, ixhotyiswe nge-remote control evumela ukuba uvule kunye nokucima ukukhanya, kunye nokutshintsha izicwangciso zayo.

Abavelisi banikezela ngeenguqulelo ezilula – kuzo iqhosha lokutshintsha umbala libekwe kwimeko.

Kukho iindidi ezininzi zabalawuli abakude:

• ngolawulo olukude lwe-infrared:
• ngeremote control elawulwa ngonomathotholo;
• ngenkqubo yeWi-Fi yolawulo olusuka kwi-smartphone okanye kwezinye izixhobo.

Abalawuli bahluke kumandla aphumayo, ahluke kuluhlu lwe-72-288 watts. Kubalwa ngokuchanekileyo ngokweskimu esifanayo nonikezelo lwamandla.

Xa ukhetha umlawuli, nikela ingqalelo ekusebenzeni kwayo. Ukuguqulwa kuyahluka kwindlela yokutshintsha imibala, kwezinye iinguqulelo kukho imodi ephazamisayo, utshintsho kwindlela yokusebenza kunye nokukhanya kokukhanya.

Inokufakwa phi isixhobo?

Umsebenzi oyintloko wokufaka ukukhanya kwe-LED kukukhanya okuphezulu komgangatho weendawo zokusebenza kwii-countertops. Ngulo mqathango ochaza imigaqo yokufaka izibane ze-LED ekhitshini. Ngaphezu koko, kufuneka ucinge malunga ne-aesthetics yesisombululo.

Kukho iinketho ezi-3 zokunyuswa kwe-LED backlight. Ukuqwalasela kubo, kufuneka kuqatshelwe ukuba ububanzi be-tabletop yi-600 mm, kwaye ubunzulu beekhabhinethi zodonga buvela kwi-280 ukuya kwi-320 mm.

Ngokuchasene nodonga lwefaskoti yasekhitshini

Ukususela kumbono we-aesthetics, inketho efanelekileyo kukufaka i-backlight ngqo kwi-apron yasekhitshini. Iprofayili efakiweyo ibonakala icocekile, ngaphandle kokwazisa i-dissonance kuyilo lwekhitshi. Ukungalungi kwesi sisombululo kubukho beendawo ezimnyama kwi-countertop.

Ingxaki ye-shading i-solvable – iprofayili ye-angular ikhethiweyo, ebekwe kwi-angle ye-45 ° kwi-countertop. Oku kuvumela ukuba ukuhamba kuhanjiswe ngokulinganayo phezu kwayo. Ukongezelela, iiprofayili zekona zibukeka zigqibeleleyo ekudibaneni kwe-backsplash yekhitshi kunye nezantsi kweekhabhinethi zodonga.

Iikhabhathi zaseziko 

Ukukhanyisa indawo yokusebenza ngokulinganayo, iphrofayili yokulungisa i-tape ihanjiswe kwiiplani zangaphambili zeekhabhinethi zodonga. Esi sisombululo sine-drawback – ukwandiswa kweprofayili phakathi kweeshelufu ezisezantsi. Oku akubalulekanga – inkqubo ibonakala kuphela ngaphantsi. Olu khetho lubandakanya ukusetyenziswa kweprofayili yephetshi eqhelekileyo.

Kwinqwelomoya engaphambili 

Okwangoku, isisombululo esinemfashini yindawo yomgca we-LED ngokuthe ngqo phantsi kweefacade zeekhabhinethi zodonga. Olu lukhetho oluhle kwaye olusebenzayo, njengoko ukukhanya kuwela ngokukhawuleza embindini we-countertop, isasazwe ngokulinganayo phezu kwayo yonke indawo yokusebenza.

Inketho echazwe ngasentla ayifanelekanga ukuzifakela ukukhanyisa. Iziphelo zeeprofayili ezilungisiweyo kufuphi neeplani ze-facade zibonakala kumacala onke, ezichaphazela kakubi i-aesthetics yesethi yekhitshi.

Unokufaka izibane ze-LED kufuphi neengcango. Kule meko, kuyimfuneko ukusebenzisa izibambo ezikhethekileyo zeprofayili kunye nezinye iteknoloji yokunyuka.

Iinketho zokunyuka

Ungafaka iiprofayili kwisethi yekhitshi ngeendlela ezahlukeneyo. Inketho enokwethenjelwa kakhulu kukulungisa kunye ne-self-tapping screws. Kwakhona, iiprofayili zinokudityaniswa okanye zifakwe kwi-tape. Indlela nganye ineempawu zayo, iingenelo kunye nokungalungi.

Indlela yokukhetha kunye nokufaka iphrofayili yomgca we-LED – funda ngayo kweli nqaku .

Ngezikrufu zokuzibetha

Le yindlela elula kwaye efikelelekayo yokulungisa ngokuchanekileyo nangokukhuselekileyo i-backlight. I-self-tapping screws ayiyi kubonakala – ii-caps zabo zihlanjululwe ngaphakathi kweeprofayili kwaye zigqunywe nge-tape ene-LED.

Indlela ine-drawback enye – ukuba isibane sichithwa emva koko, imingxuma ephantsi kwe-self-tapping screws iya kuhlala kwiikhabhinethi zodonga. Kungenxa yesi sizathu ukuba olu khetho lufanelekile kuphela kwimeko yokuba isethi yekhitshi ayiyi kuhanjiswa naphi na, kuba kuya kuba nzima ukususa nokuhambisa iikhabhinethi ngaphandle kokuphula i-aesthetics.

Ukukhawuleza ngokusebenzisa i-self-tapping screws ihamba kunye nomngcipheko wokuba ii-caps zabo ziya kuphuma kwaye ziphazamise ukulungiswa okuqhelekileyo kwe-tape. Ngesi sizathu, kuyacetyiswa ukuba usebenzise iikliphu zokunyuswa. Ziqale zijijwe kwiikhabhinethi ezinezikhonkwane zokuzicofa, kwaye emva koko iiprofayili zifakwe kuzo. 

Ukulungiswa kwetape 

Ukulungisa ukukhanya kwe-LED kunye neeprofayili ze-aluminium kwisiseko, ungasebenzisa i-tape yokubambelela. Kodwa icala elinye kuphela. Kwaye qiniseka ukuba unamandla okumelana nobushushu, kuba ii-LED, nangona zingekho kakhulu, zisafudumeza kwaye zigqithise ubushushu kwiprofayile.

Iimpawu zokulungisa kwi-adhesive tape:

• Ukuba usebenzisa iteyiphu yokubambelela eqhelekileyo, enganyangekiyo ekushiseni, iya kuphulukana neepropathi zayo ngokukhawuleza, kwaye yonke inkqubo yokukhanyisa iya kuvele iwele kwi-countertop.
• Ukukhanyisa, okutyalwe kwi-tape yokubambelela, kunokuchithwa ngokulula kwaye ngokulula ngaphandle kokuphula ingqibelelo yefenitshala.
• Nokuba iteyiphu yokuncamathelisa kakhulu ukumelana nobushushu iphulukana neempawu zayo kungekudala okanye kamva. Xa ukhetha olu khetho lokunyuswa, kubalulekile ukuqonda ukuba iprofayili inokuphuma kwaye kuya kufuneka uyincamathisele kwakhona.

ukuncamathelisa

Le yeyona ndlela ingathandekiyo kwaye inzima yokuncamathela iiprofayili. Inzuzo kuphela yale ndlela kukuthembeka. Akuyi kusebenza ukuqhaqha iiprofayili ezinamathele, ngokungafaniyo nezo zityalwe kwi-tape yokubambelela. Emva kokuba zikrazulwe, imikhondo yeglue ihlala kwiishelufa, umphezulu udla ngokonakala.

Ukufakwa komgca we-LED

Imichilo ye-LED ifaneleke kakhulu ekukhanyeni indawo yokusebenza, iindawo ezikhanyayo kunye namabala angaphezulu komsebenzi wokuhlobisa. Iiteyiphu zinika ukukhanya okufanayo kunye namandla – kanye into oyifunayo kwiindawo zokusebenza.

Imichilo ye-LED ifumaneka ngokurhweba kwiikhoyili ze-5 m. Zinqunywe kwiindawo eziphawulweyo kunye nezikere eziqhelekileyo. Ukuba kuyimfuneko, amaqhekeza axhunyiwe omnye komnye.

Ngomsebenzi uya kufuna:

• Uluhlu lwe-LED;
• iprofayili – kufuneka ibe neeplagi kunye ne-diffusers;
• iyunithi yamandla;
• tshintsha;
• ikhebula ngeplagi 220 V;
• intambo yobhedu 0.75–1.5 mm²;
• idegreaser;
• iteyiphu yokukhusela;
• intsimbi yokuthambisa;
• i-drill;
• isikere kunye nemela;
• screwdriver;
• i-hacksaw yentsimbi;
• roulette.

Unokufuna kwakhona isibiyeli sokunyuka, izihlanganisi zekona kunye neteyiphu.

 Inkqubo yokusebenza:

1. Lungisa iteyiphu. Sika isiqwenga sobude obufunwayo – kunye nemigca echokoziweyo.

2. Qhuba ulwakhiwo lovavanyo. Oku kuya kunceda ukuphepha iimpazamo zofakelo. Hlanganisa onke amacandelo kwisistim kwaye ujonge ukusebenza kwawo. Ukuba usebenzisa isitshixo esiqhelekileyo – isitshixo okanye intambo, qhagamshela ucingo olunye kumandla ombane, kwaye unqumle okwesibini, uqhawule iziphelo kwaye unamathisele kwii-terminals switch.
   Cinga ngendlela iingcingo eziya kufumaneka ngayo, fumana indawo yecala lamandla, unqume indawo apho kuya kufuneka ukuba ubhobhoze iingcingo.

3. Sika iprofayile. Emva kokulinganisa ubude obufunwayo, nqumla isiqwenga seprofayili, kwaye uqiniseke ukuba uthathela ingqalelo ubude beeplagi (kungenjalo ziya kuncamathela ngaphandle kwekhabhinethi). Saw nge hacksaw okanye i-miter saw.
   Sika ngokuthe ngqo nge-diffuser. Ukuyigcina ingashukumi, yikhusele ngeenguqu ezimbini okanye ezintathu ze-masking tape.

4. Qhoboshela iprofayile. Yiqhoboshele kwikhabhathi yakho. Ukuba usebenzisa iikliphu, zibophe ngezikrufu, ubuyela umva ukusuka kumda wesikhokelo 10-15 cm, uze ucofe iprofayili kuzo.
   Ukuba iphrofayili ifakwe ngokuthe ngqo kwifenitshala, yenza imingxuma kwisiseko sayo ngexesha le-1 m. Okanye ecaleni kwemida – ukuba inobude obufutshane. Sebenzisa i-4 mm drill drill, uze uzikhuphe nge-8 mm drill ukwenza i-chamfers – iintloko ze-screws ziya kufihlwa kuzo. Okanye sebenzisa i-adhesive tape ukuze uhlambulule umphezulu weekhabhinethi.

5. Gcoba iteyiphu kwiprofayili. Phatha iprofayili nge-degreaser – indawo yayo yangaphakathi. Gcoba i-tape kuyo, ukususa ifilimu ekhuselayo ngaphakathi kwayo. Yicinezele ngokuqinileyo, ucinezela into nganye.

6. Faka i-diffuser. Susa ifilimu ekhuselayo kuyo kwaye uyifake kwiprofayili. Qaphela ukuba ungaphuli inxalenye – yenziwe ngeplastiki yabo. Emva koko faka ii-end caps ekupheleni kweprofayili.

7. Faka iswitshi. Ukuba usebenzisa iswitshi esisigxina, kufuneka uyifake ngexesha lokulungisa. Ukuba umtshintshi unentambo, yifake phantsi kwekhabhinethi ngokubhobhoza umngxuma kuyo.
   Xa ufaka iiswitshi ezikufutshane, zifihle kwiikhabhinethi. Kwaye ukhuphe inzwa ye-infrared ngaphandle ngokwenza umngxuma emazantsi okanye eludongeni lwekhabhathi.

8. Qokelela umzobo wocingo. Beka zonke izinto kwiindawo zabo – iintambo, ukunikezelwa kwamandla, njl. Gxininisa zonke izixhumanisi zombane kwaye uqinisekise ukuqina kwe-backlight – amanzi akufanele afumane kuyo.

9. Jonga ukuba i-backlight iyasebenza.

Ividiyo malunga nokufaka umtya we-LED ekhitshini:

Ukukhanya kwe-LED ekhitshini sisisombululo esihle kakhulu esikuvumela ukuba wenze ukukhanya okukhululekile. Izibane ze-LED ezisetyenzisiweyo kunye neeteyiphu zenza ukukhanya okuthambileyo, okulinganayo okungafaniyo okungakuthukutheli okanye ukudinwa amehlo.